Parts of electric and electronic equipment may be exposed to overheating stress due to the effect of electricity, and its deterioration may degrade the safety performance of the equipment. These parts should not be excessively affected by the heat and fire generated inside the equipment. Parts of insulating material or other solid combustible materials that are prone to flame spread inside the device may ignite due to a glow wire or a hot element. Under certain conditions, such as the fault current flowing through the wire, the element overloaded, and the poorly-contacted glow element light up.
Applied for testing the sealing performance of the product shell, evaluating the exposure of auto parts/seals/lamps/meters to dry sand or dust soil environment, product resistance and storage and normal operation.
The equipment is suitable for rain and dust prevention of various auto parts and industrial electronic products such as electronic appliances. Immersed in sand water test, auto parts including lights, door locks, electrical, instrumentation, dust jacket,
testing of full seal stability of electronic household appliances and other systems.
Suitable for electronic connectors, semiconductor ics, transistors, diodes, liquid crystal LCD,
Chip resistance capacitance, components industry electronic components metal pin solder test
Pre-aging accelerated life time test; Semiconductor, passive components, part pin oxidation
Experiment. Microcomputer temperature controller, LED digital display, PID+SSR control, platinum
Resistance temperature sensor (PT-100), resolution 0.1℃, fully automatic safety protection device.
To simulate the damage caused by the turbulence and vibration of the car during transportation to various products and packaging, it can be identified the ability to tolerate vibration.
It is a mechanical afterforce testing machine for static load, tensile, compression, bending, shearing, tearing, stripping and other mechanical properties of various materials. Widely used in plastic sheet, wire and cable, rubber, textile, steel, glass fiber, pipe, film and other fields
Single-arm drop tester This machine is specially designed to test the damage of product packaging by falling
Condition, and assess the impact strength during transportation and handling;
Standard :ISO 2248 JIS Z0202-87 GB/T4857.5-92
Sterilize surfaces of food, beverages, air and industrial products. Various microorganisms (such as Escherichia coli, mold, Bacillus anthracis) were killed or the total number of bacteria decreased by ultraviolet irradiation sterilization. Widely used in food and beverage processing, medical treatment, disinfection cabinets, water treatment, industrial products, packaging fields.
Falling ball impact testing machine is used to test plastic, ceramic, acrylic, glass fabric. The robustness of materials and coatings. Conforms to JIS-K6745, A5430 test standards. The machine adjusts the steel ball with a certain weight at a certain height to make the steel ball fall freely hit the test material, according to its damage degree, in order to judge the quality of the test product, the equipment well received by the majority of manufacturers, is a more ideal test equipment.
It is suitable for paper tube with outer diameter of 200mm, also known as paper tube pressure testing machine and paper tube compression testing machine, is the basic instrument for testing the compressive performance of paper tubes, using high-precision sensors, high-speed processing chip design ensures sampling accuracy.
The whole box shell is made of exquisite paint or stainless steel; The inner wall of the laboratory is made of SUS304 advanced anti-corrosion mirror stainless steel plate with reasonable structure design, sophisticated manufacturing technology and beautiful interior appearance.
Salt water spray testing machine is for a variety of material surface treatment, including coating, electroplating, organic and inorganic skin film, anodic treatment, anti-rust oil and other anti-corrosion treatment after testing its corrosion resistance, so as to establish the quality of the product.